• 100% polyester MTR filament fleece
• Zippered pockets
• Columbia woven patch logo on left sleeve

The Steen's Collegiate Navy is slightly darker than the Columbia Navy in Women's Benton

• 100% polyester MTR filament fleece, 250g
• Interior drawcord
• Zippered hand pockets
• Columbia woven patch logo on sleeve

The Steen's Collegiate Navy is slightly darker than the Columbia Navy in Women's Benton

• 3.2 oz./yd², 100% recycled polyester
• Water-repellant
• Top panel heather woven fabric
• Zipper enclosure
• Two front pockets
• Elastic bungee cord bottom hem
• adidas logo on back neck

This product meets the following Sustainable Style subcategory:

Sustainable Materials: contains 100% recycled polyester

• 2.5 oz./yd² (US) 4.5 oz./L yd (CA), 100% polyester fabric with interior water-resistant coating
• Waterproof pressure resistance: 600 mm
• No lining
• Matte finish eyelets and zippers
• #4 zipper with zipper pull & rubber zipper pull tab
• Reversed zipper tape
• Single layer body with fine mesh hood liner
• Three panel hood
• Scuba neck
• Self-neck tape
• Welt pockets with mesh pocket bags
• Tightening toggle at waistband
• Elastic cuffs
• Locker loop in center back
• Tear away label

• 8.9 oz./yd², 100% polyester two-toned Sherpa
• Self fabric collar dyed to match stitching
• Half moon back yoke
• Twill tape inside neck trim
• Quarter-zip
• Woven patch label

• Power Stretch: 95/5 polyester/spandex, 8.26 oz/yd²
• Custom Spyder knit jacquard 100% polyester
• Debossed Spyder neck tape & internal locker loop
• Collar with brushed tricot
• Quarter-zip front closure
• Inseam pockets with zip closure
• Strategically placed stretch panels for mobility
• Stylized seams with rivet detail
• High-definition rubberized Spyder wordmark
• Raised silicone Spyder Bug patch

• 5.1 oz./yd², 62/38 polyester/recycled polyester
• Adjustable zip-off hood
• Debossed Spyder neck tape and internal locker loop
• Forward-set shoulder seams
• Exposed reverse-coil zipper with internal draft flap
• Internal right chest patch pocket with stylized Spyder grommet
• Two secure-zip hand pockets with branded zipper pulls
• Partially elasticated cuffs and hem cinch cord
• Stylized back seams
• High-definition rubberized Spyder wordmark back
• Iconic rubberized 'Bug' logo on left sleeve

• Exterior: 55/45 polyester/recycled polyester, 4.2 oz/yd²
• Fill: 100% recycled polyester, 2.1 oz/yd²
• Lining: 100% polyester, 1.7 oz/yd²
• Three-piece visored hood cinches tight to seal out sleet and wind
• Debossed spyder neck tape & internal locker loop
• Collar with brushed tricot
• Adjustable cuff tabs with interior stretch cuffs and thumb holes
• Stormflap with snap closure covers center front zip
• Two hand warmer chest pockets with concealed snaps, zippered lower pockets with snap flap
• Two interior mesh pockets
• Drop-tail hem and back vent
• Targeted internal stretch panels
• High-definition Spyder wordmark & Spyder Bug

• 5.1 oz./yd², 62/38 polyester/recycled polyester
• Adjustable zip-off hood
• Debossed Spyder neck tape and internal locker loop
• Forward-set shoulder seams
• Exposed reverse-coil zipper with internal draft flap
• Internal right chest patch pocket with stylized Spyder grommet
• Two secure-zip hand pockets with branded zipper pulls
• Partially elasticated cuffs and hem cinch cord
• Stylized back seams
• High-definition rubberized Spyder wordmark back
• Iconic rubberized 'Bug' logo on left sleeve

• 20d 100% pre-consumer recycled nylon ripstop is lightweight, breathable, and abrasion resistant.
• Outer shell is treated with an environmentally conscious PFC-Free DWR for premium water repellency to keep you dry
• Polyester stretch lining increases breathability, mobility, and comfort
• PrimaLoft® Silver Active insulation is breathable, packable, and water-resistant and keeps you warm even when wet.
• Zippered hand pockets and interior zippered pocket keep your things secure
• Adjustable drawcord hem keeps cold air out

• 92/8 recycled polyester/ elastane drop needle
• Technical grid fleece moves moisture away from the body
• Stretch comfort and mobility
• Zippered hand pockets

• 8 oz./yd² (US), 13.4 oz./L yd (CA), 64/31/5 cotton/polyester/spandex textured knit
• Matching zipper with contrast rubber pull
• Lower zippered pockets
• UV 40+

• 11 oz./yd² (US), 18.4 oz./L yd (CA), 100% polyester boucle sweater fleece
• Trim: 100% recycled nylon at left chest, inner collar, lower pockets & inner armholes
• Center front zipper with autolock slider and cord toggles
• Lower zippered pockets
• Left chest zippered pocket

• 92/8 recycled polyester/ elastane drop needle
• Technical grid fleece moves moisture away from the body
• Stretch comfort and mobility
• Zippered hand pockets

• 6.8 oz./yd² (US), 11.4 oz./L yd (CA), 100% polyester mélange brushed-back fleece with UTK Ceramitech™ print
• Active fit
• UTK Ceramitech™ technology provides improved thermal retention against the body through specialized printing
• UTK Hydropel™ technology repels water without sacrificing comfort in wet conditions
• Coverstitch details throughout
• Center front coil zipper with contrast teeth, semi-autolock slider and rubber pull
• Princess seams for flattering feminine fit
• Lower pockets with invisible zippers
• Active fit

• 3 oz./yd² (US), 5 oz./L yd (CA), 67/33 cationic polyester/recycled polyester textured knit
• Lining: 95/5 polyester/spandex
• 3,000 g breathability rating
• 3,000 mm waterproof rating
• Printed jersey lining in hood
• Drawcord with grommets at hood
• Matching lycra binding at cuffs
• Center front reverse coil zipper
• Lower zippered pockets
• Inner pocket at right chest

• 3 oz./yd² (US), 5 oz./L yd (CA), 67/33 cationic polyester/recycled polyester textured knit
• Lining: 95/5 polyester/spandex
• 3,000 g breathability rating
• 3,000 mm waterproof rating
• Printed jersey lining in hood
• Drawcord with grommets at hood
• Matching lycra binding at cuffs
• Center front reverse coil zipper
• Lower zippered pockets
• Inner pocket at right chest
• High-low hem

• 6.8 oz./yd² (US), 11.4 oz./L yd (CA), 100% polyester mélange brushed-back fleece with UTK Ceramitech™ print
• Active fit
• UTK Ceramitech™ technology provides improved thermal retention against the body through specialized printing
• UTK Hydropel™ technology repels water without sacrificing comfort in wet conditions
• Coverstitch details throughout
• Center front coil zipper with contrast teeth, semi-autolock slider and rubber pull
• Lower front zippered pockets with contrast teeth
• Active fit

• 8 oz./yd²/273 gsm (US), 13.4 oz./L yd (CA), 65% polyester, 35% cotton twill
• Polyester taffeta lining with diamond quilting
• Water-repellent
• Dyed-to-match zipper and twill zipper pulls
• Inner patch, left sleeve and lower zippered pockets
• Two-button adjustable back tabs for comfort and fit
• EZEM™ System for embroidery access

• 100% polyester fleece
• Warm and lightweight Repreve® Recycled 100-weight fleece
• Zippered hand pockets keep things secure
• Elastic bound cuffs and hem

• 4.7 oz./yd², 60/40 cotton/ polyester sanded duck
• Water-resistant, wind-resistant fabric blocks the elements
• Micro-duck fabric is tough and durable while providing a soft hand feel
• Zip through, fleece-lined collar for warmth and style
• Drop tail traps the heat
• Snap adjustments on cuffs
• Multiple pockets including fleece-lined front pockets, three zippered outside pockets

• 100% polyester fleece
• Warm and lightweight Repreve® Recycled 100-weight fleece
• Half-zip pullover style
• Elastic bound cuffs and hem

• 100% polyester fleece
• Warm and lightweight Repreve® Recycled 100-weight fleece
• Zippered hand pockets
• Elastic bound cuffs and hem

• 8 oz./yd²/273 gsm (US), 13.4 oz./Lyd (CA), 65% polyester, 35% cotton twill
• 4.1 oz./yd² poly fill
• Polyester taffeta lining with diamond quilting
• Matching drawcord at neck
• Dyed-to-match zipper and twill zipper pulls
• Multiple inner pockets for storage
• Matching rib trim at cuff and hem
• EZEM™ embroidery access

• 100% polyester fleece
• Warm and lightweight Repreve® Recycled 100-weight fleece
• Half-zip pullover style
• Elastic bound cuffs and hem